Table of Contents
Advertisement
3.3.2 General Operations
Selecting a Window
An active window is selected by scrolling through menu windows until the target
window flashes. Pressing
To select a desired window:
Ä Press
SELECT
until the window you want to activate flashes.
Selecting and Entering Values
The value in the active window is selected with the up/down arrow keys. When the
window represents a list of menu entries or a list of parameters, the up/down arrow
keys provide scrolling through a list of applicable options. When a window
represents a numeric value, the up/down arrow keys provide adjustment of the
number to the desired value.
To scroll through a list of parameters or to adjust a number:
Ä Press the up arrow key to scroll values in the window forward.
Ä Press the down arrow key to scroll values in the window backward.
To enter the selected value:
Ä When desired item or value appears in the window, press
If the value in the currently active window is selected correctly, after pressing ENTER, you
will exit the window. If the window is still flashing, then the value is entered incorrectly or
incompatible with other setup parameters. Check the value for applicable range and for
compatibility with previously specified parameters.
To leave the value in the window unchanged:
Ä Press
SELECT
to move to another window.
Accelerating the Display Updates
When you press and release the up or down arrow key, the numeric value currently
displayed in the active window changes by incrementing or decrementing the right
most digit.
When you press and hold the key, the value changes at accelerated rate that will
depend on the time while you hold the key pressed. For the first 5 seconds, the value
is updated twice per second, and then the updating rate is accelerated up to eight
times per second. Later on, every 5 seconds, the window position being updated is
moved one digit left.
34
SELECT
advances you to the next window.
ENTER
.
Operating The PM295
Advertisement
Table of Contents
