Table of Contents
Advertisement
3.3.10 Counter Setup
Select the
Cnt
entry from the
The
COUNTER SETUP
eight counters. The upper window lists sub-menu entries, the central window lists
pulse inputs that can be connected to the counter, and the lower window displays
scale factor for the selected counter. For information on counter operation, see
Section 4.12.
Cnt1
InP1
1
To change the scale factor for the counter:
Ä Press
SELECT
Ä Adjust the scale factor for the counter with the up/down arrow keys. The
applicable range is 1 to 9999. You can set the scale factor for the counter
regardless of the counter input to provide counting of internal events.
To enter the changed parameter(s):
Ä Press
ENTER to
To quit the menu:
Ä From the upper window, press
NOTE
The external input connected to the counter should be allocated as a pulse input.
3.3.11 Analog Output Setup
Select the
entry from the
Aout
The
ANALOG OUTPUT SETUP
one of 16 multiplexed analog channels. The upper window lists sub-menu entries,
the central window lists setup parameters for the selected analog channel, and the
Operating The PM295
MAIN
menu and press
menu consists of eight sub-menus, each meant for one of
To select and view a counter setup:
Ä From the upper window, select the desired counter with
the up/down arrow keys.
To connect a pulse input to the counter:
Ä Press
SELECT
Ä Select the input for the selected counter with the up/down
arrow keys. The
to choose the lower window.
return to the upper window.
ENTER
menu and press
MAIN
menu consists of 16 sub-menus, each meant for
ENTER
.
to choose the central window.
entry disables external input
nonE
to return to the
MAIN
ENTER
menu.
.
41
Advertisement
Table of Contents
