Table of Contents
Advertisement
lower window displays the value for the selected parameter. See Section 4.10 for
information on analog output operation.
To select an analog channel setup:
An 1
Ä From the upper window, select the desired channel with the
GrP
To view the analog channel parameters:
nonE
Ä Press
Ä Scroll through the list of parameters with the up/down
The following illustrations show what the parameter windows look like:
Output
An 1
parameter
group
GrP
rt.Ph
All measured parameters that can be assigned to the analog output channel are
organized in groups listed in Table B-4a (see Appendix B) with the corresponding
group label. The analog output parameter is defined by both the parameter group
and parameter name within the group. All applicable parameters are listed in Table
B-4b with their default zero and full scales.
NOTE
When the analog scale value exceeds the number of places in the window, the
high order digits are expanded to the left window giving a resolution up to 7 digits.
If the value still exceeds the maximum available resolution, it is converted to
higher units (for instance, kW to MW) and a decimal point is placed in the window
to indicate the new measurement range.
To assign the parameter to the analog output channel:
Ä In the central window, select the
Ä Press
to move to the lower window.
SELECT
Ä Scroll through the group labels with the up/down arrow keys until the desirable
entry appears.
Ä Press
to return to the central window.
ENTER
42
up/down arrow keys.
SELECT
to choose the central window.
arrow keys.
Output
An 1
parame-
ter name
Out
U 1
entry with the up/down arrow keys.
GrP
Zero
An 1
An 1
(low)
scale
Lo
Hi
0
660
Operating The PM295
Full
(high)
scale
Advertisement
Table of Contents
