Table of Contents
Advertisement
AccS
PASS
1234
Store your password in a safe place. If you will not provide the correct
password, you will need to contact your local distributor for the superuser
password to override password protection.
Enabling/Disabling Password Checking
Ä From the central window, select the
AccS
CtrL
OFF
3.4 Self-Test Diagnostics
The PM295 periodically performs self-test diagnostics. If the instrument fails the
self-test diagnostics, it discards the last measurement results, and an error code is
displayed for one second on all LEDs. Error codes are listed in Table 3.1. Frequent
failures may be result of excessive electrical noise in the region of the instrument. If
the instrument resets itself continuously, contact your local distributor.
Table 3-1 Self-Test Diagnostic Codes
Diagnostic Code
1
2
3
4
5
7
8
Operating The PM295
To change the user password:
Ä Press
SELECT
Ä Adjust the password with the up/down arrow keys. The
password is up to four digits long.
Ä Press
to return to the central window.
ENTER
To change the password protection mode:
Ä Press
SELECT
Ä With the up/down arrow keys select
password protection, and select
protection.
Ä Press
ENTER
to return to the central window.
Meaning
ROM error
RAM error
Watch dog timer reset
Sampling failure
Out of control trap
Timing failure
Power up
to choose the lower window.
CtrL
entry with the up/down arrow keys.
to choose the lower window.
On
to disable
OFF
to enable password
55
Advertisement
Table of Contents
