Satec System 295 Installation And Operation Manual page 57

To quit the sub-menu:
Ä From the central window, press
Viewing and Changing a Setpoint Action
Each action sub-menu displays the action type and action target for one of four
setpoint actions. To enter a sub-menu, select in the upper window one of entries
to with the up/down arrow keys, then press
Act1 Act4
pictures illustrate the sub-menu windows.
To view the action parameters:
Ä From the central window, scroll through the list of parameters with the up/down
arrow keys. The lower window will display the current parameter setup.
Act1
tYPE
rEL
For applicable action types and their appropriate targets, refer to Table B-9 (see
Appendix B). To specify setpoint actions, refer to Section 4.17.5.
To change the action type:
Ä From the central window, select the
Ä Press
SELECT
Ä Scroll through the applicable actions with the up/down arrow keys until the
desired label appears.
Ä Press
to return to the central window.
ENTER
To change the action target:
Ä From the central window, select the
Ä Press
SELECT
Ä Scroll through the applicable choices with the up/down arrow keys until the
desired label appears.
Ä Press
to return to the central window.
ENTER
Operating The PM295
ENTER
Action
Act1
type
tArG
rEL.1
to choose the lower window.
to choose the lower window.
to return to the upper window.
SELECT
Action
target
tYPE entry with the up/down arrow keys.
entry with the up/down arrow keys.
tArG
. The following
49