Satec System 295 Installation And Operation Manual page 134

Table B-1 Setup Parameters
Parameter
Action number Selects one of the four setpoint
actions
Action type Specifies the action to be made
on setpoint operation
Action target Specifies the target to which the
action is intended
Setpoint delays definition
Time unit Defines the time unit for delay
measurement
Operate delay Specifies the time delay to
operate the setpoint
Release delay Specifies the time delay to release
the setpoint
Timer setup
Timer number Selects one of the four interval
timers
Timer interval Defines the time interval for the
timer
Real-time clock setup
Date Defines current date (in user-
programmable format for front
panel operation)
Time Defines the current time in
HH.MM.SS format
Day of week Defines the current day of week
Display setup
Date format Defines the date format for the
front panel display
Reset/clear functions
See Table B-10
Password protection control
User password Specifies the password to enter
the protected level
Password control Disables/enables password
checking
126
Description
Appendix B Programmable Parameters
Access
Options Front
panel
1 to 4
see Table B-9
see Table B-9
0.1 sec/ 1 sec
1 to 9999
1 to 9999
•
1 to 4
1 to 9999 sec
•
see Section
3.3.17
00.00.00 to
23.59.59
see Section
3.3.16
•
see Section
3.3.17
•
•
0 to 9999
disable/enable
Commu-
nications
•
•
•