Danfoss VLT AutomationDrive FC 302 Instruction Manual page 66

Programming
3-10 Preset Reference
Array [8]
Range: 0–7
Range:
0 %
*
6 6
Figure 6.9 Preset Reference
Preset ref. bit
Preset ref. 0
Preset ref. 1
Preset ref. 2
Preset ref. 3
Preset ref. 4
Preset ref. 5
Preset ref. 6
Preset ref. 7
Table 6.4 Bits per Preset Reference
3-11 Jog Speed [Hz]
Range:
Size
related
*
64
Function:
[-100 - 100 %]
2 1
0 0
0 0
0 1
0 1
1 0
1 0
1 1
1 1
Function:
[ 0 - par. The jog speed is a fixed output speed
4-14 Hz] at which the adjustable frequency
drive is running when the jog
function is activated.
See also 3-80 Jog Ramp Time.
Danfoss A/S © Rev. 2014-02-07 All rights reserved.
Instruction Manual
3-15 Reference Resource 1
Option:
[0] No function
[1] Analog Input 53
[2] Analog Input 54
[7] Frequency input
29
[8] Frequency input
33
[11] Local bus
reference
[20] Digital pot.meter
[21] Analog input
X30-11
0
[22] Analog input
0
X30-12
1
[29] Analog Input
0
X48/2
1
3-16 Reference Resource 2
0
Option:
1
0
1
[0] No function
[1] Analog Input 53
[2] Analog Input 54
[7] Frequency input 29
[8] Frequency input 33
[11] Local bus reference
[20] Digital pot.meter
[21] Analog input
X30-11
[22] Analog input
X30-12
[29] Analog Input X48/2
Function:
Select the reference input to be used
for the first reference signal.
parameter 3-15 Reference Resource 1,
parameter 3-16 Reference Resource 2 and
parameter 3-17 Reference Resource 3
define up to three different reference
signals. The sum of these reference
signals defines the actual reference.
(General Purpose I/O Option Module)
(General Purpose I/O Option Module)
Function:
Select the reference input to be used
for the second reference signal.
parameter 3-15 Reference Resource 1,
parameter 3-16 Reference Resource 2
and parameter 3-17 Reference Resource
3 define up to three different reference
signals. The sum of these reference
signals defines the actual reference.
MG37A222