Danfoss VLT AutomationDrive FC 302 Instruction Manual page 5

Contents
6.1 How to Program the Adjustable Frequency Drive
6.2 How to Program the Active Filter
6.3 Parameter Lists - Adjustable Frequency Drive
6.4 Parameter Lists - Active Filter
7 Application Examples
7.1 Introduction
7.2 Application Examples
7.3 Connection Examples for Control of Motor with External Signal Provider
8 Status Messages
8.1 Status Display
8.2 Status Message Definitions
9 Warnings and Alarms
9.1 System Monitoring
9.2 Warning and Alarm Types
9.3 Warning and Alarm Displays
9.4 Warnings and Alarm Definitions - Adjustable Frequency Drive
9.5 Warning and Alarm Definitions - Filter (Left LCP)
10 Basic Start-up Troubleshooting
11 Specifications
11.1 Power-Dependent Specifications
11.2 Mechanical Dimensions
11.3 General Technical Data - Adjustable Frequency Drive
MG37A222
Instruction Manual
6.1.1 Quick Set-up Parameters
6.1.2 Basic Set-up Parameters
6.2.1 Using the Low Harmonic Drive in NPN Mode
6.3.1 Parameter Selection
7.3.1 Start/Stop
7.3.2 Pulse Start/Stop
7.3.3 Speed Up/Down
7.3.4 Potentiometer Reference
9.2.1 Warnings
9.2.2 Alarm Trip
9.2.3 Alarm Trip Lock
11.1.1 Line Power Supply 3x380-480 V AC
11.1.2 Derating for Temperature
Danfoss A/S © Rev. 2014-02-07 All rights reserved.
52
52
55
77
77
78
78
110
119
119
119
124
124
124
125
125
126
126
126
129
129
129
129
129
129
129
130
139
146
149
149
149
152
153
156