Danfoss VLT AutomationDrive FC 302 Instruction Manual page 161

Specifications
Relay outputs
Programmable relay outputs
Relay 01 Terminal number
1)
Max. terminal load (AC-1) on 1-3 (NC), 1-2 (NO) (resistive load)
(inductive load @ cosφ 0.4)
Max. terminal load (AC-15) 1)
1)
Max. terminal load (DC-1) on 1-2 (NO), 1-3 (NC) (resistive load)
1)
Max. terminal load (DC-13) (inductive load)
Relay 02 Terminal number
Max. terminal load (AC-1) 1) on 4-5 (NO) (resistive load)
on 4-5 (NO) (inductive load @ cosφ 0.4)
1)
Max. terminal load (AC-15)
1)
Max. terminal load (DC-1) on 4-5 (NO) (resistive load)
1)
Max. terminal load (DC-13) on 4-5 (NO) (inductive load)
Max. terminal load (AC-1) 1) on 4-6 (NC) (resistive load)
on 4-6 (NC) (inductive load @ cosφ 0.4)
1)
Max. terminal load (AC-15)
1)
Max. terminal load (DC-1) on 4-6 (NC) (resistive load)
1)
Max. terminal load (DC-13) on 4-6 (NC) (inductive load)
Min. terminal load on 1-3 (NC), 1-2 (NO), 4-6 (NC), 4-5 (NO)
Environment according to EN 60664-1
1) IEC 60947 parts 4 and 5
The relay contacts are galvanically isolated from the rest of the circuit by reinforced isolation (PELV).
2) Overvoltage Category II
3) UL applications 300 V AC 2 A
Control characteristics
Resolution of output frequency at 0–1000 Hz
System response time (terminals 18, 19, 27, 29, 32, 33)
Speed control range (open-loop)
Speed accuracy (open-loop)
All control characteristics are based on a 4-pole asynchronous motor
Surroundings
Enclosure, frame size D and E
Enclosure, frame size F
Vibration test
Relative humidity
Aggressive environment (IEC 60068-2-43) H
Test method according to IEC 60068-2-43 H
Ambient temperature (at 60 AVM switching mode)
- with derating
- with full output power, typical EFF2 motors (see chapter 11.1.2 Derating for Temperature)
- at full continuous FC output current
1)
For more information on derating, consult the design guide
Minimum ambient temperature during full-scale operation
Minimum ambient temperature at reduced performance
Temperature during storage/transport
Maximum altitude above sea level without derating
Maximum altitude above sea level with derating
For more information on derating, consult the design guide
EMC standards, emission
EMC standards, immunity
MG37A222
Instruction Manual
2)3)
5–95% IEC 721-3-3; Class 3K3 (non-condensing) during operation
S test
2
S (10 days)
2
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6
Danfoss A/S © Rev. 2014-02-07 All rights reserved.
1-3 (break), 1-2 (make)
4-6 (break), 4-5 (make)
24 V DC 10 mA, 24 V AC 20 mA
Overvoltage category III/pollution degree 2
1:100 of synchronous speed
30–4000 RPM: Maximum error of ±8 RPM
-13°–+149°/158°F [-25°–+65°/70°C]
EN 61800-3, EN 61000-6-3/4, EN 55011, IEC 61800-3
EN 61800-3, EN 61000-6-1/2,
2
240 V AC, 2A
240 V AC, 0.2 A
60 V DC, 1 A
24 V DC, 0.1 A
400 V AC, 2 A
240 V AC, 0.2 A
80 V DC, 2 A
24 V DC, 0.1 A
240 V AC, 2 A
240 V AC, 0.2 A
50 V DC, 2 A
24 V DC, 0.1 A
±0.003 Hz
≤ 2 ms
11
IP21, IP54
IP21, IP54
0.7 g
class kD
max. 131°F [55°C] 1)
max. 122°F [50°C] 1)
1)
max. 113°F [45°C]
32°F [0°C]
14°F [-10°C]
3300 ft [1,000 m]
10,000 ft [3000 m]
159
11