Parameter - Festo CPX-E-4IOL Series Translation Of The Original Instructions

Parameterisation

Parameter

Device error code (low)
Device error code (high)
1) Function number (è Description of automation system CPX-E); m = module number (counted from left to right, starting from 0)
2) only read access possible
Tab. 15 Overview of parameters
3.2 Parameter
3.2.1 Monitoring U
The "Monitoring U " parameter defines whether the monitoring of the load voltage supply shall be
load
activated or deactivated in regard to undervoltage.
When the monitoring is activated, the error is sent to the bus module and indicated by the error LED
on the module.
Parameter – Monitoring U
Setting
Deactivate monitoring
Activate monitoring
1) Function number (è Description of automation system CPX-E); m = module number (counted from left to right, starting from 0)
Tab. 16
Festo — CPX-E-4IOL-... — 2020-01a
load
load
Selection via software
inactive
Active (default)
F no.
1)
4828 + 64m
+ 34
+ 35
Selection via parameter
F no. Bit
1)
4828 +
7 6
64m
+ 0
+ 0
Detailed information
Tab. 24
è
5 4 3 2 1
0
1
0
17