Factory Settings; Ul Applications; About The Installation Instructions; General Purpose - Deif AGC 200 Installation Instructions Manual

AGC 200 installation instructions
4189340610 UK

1.1.5 Factory settings

The Multi-line 2 unit is delivered from factory with certain factory settings. These are based on average values
and are not necessarily the correct settings for matching the engine/generator set in question. Precautions
must be taken to check the settings before running the engine/generator set.

1.1.6 UL applications

These flat surface panel-mounted controllers are intended to be used in Listed Generator Assemblies where
the suitability of the combination has been determined by Underwriters Laboratories.
These devices have been evaluated for fire and shock only. The accuracy and/or reliability of the voltage reg-
ulating function have not been evaluated. Metering, monitoring, protection and signaling functions have not
been evaluated.

1.2 About the installation instructions

1.2.1 General purpose

These Installation Instructions mainly include general product and hardware information, mounting instruc-
tions, terminal strip descriptions, I/O lists and wiring descriptions.
The general purpose of this document is to give the user important information to be used in the installation of
the unit.
Make sure to read this document before starting to work with the Multi-line 2 unit and the gen-
set to be controlled. Failure to do this could result in human injury or damage to the equip-
ment.

1.2.2 Intended users

These Installation Instructions are mainly intended for the person responsible for the design and installation.
In most cases, this would be a panel builder designer. Naturally, other users might also find useful information
in the document.

1.2.3 Contents and overall structure

This document is divided into chapters, and in order to make the structure simple and easy to use, each
chapter will begin from the top of a new page.
DEIF A/S
General information
Page 5 of 67