Table of Contents
Advertisement
1. General information
1.1
Warnings and notes
Throughout this document, a number of warnings and notes with helpful user information will be presented. To ensure that these are
noticed, they will be highlighted as follows in order to separate them from the general text.
Warnings
DANGER!
Warnings indicate a potentially dangerous situation, which could result in death, personal injury or damaged equipment, if
certain guidelines are not followed.
Notes
INFO
Notes provide general information, which will be helpful for the reader to bear in mind.
1.2
Legal information and disclaimer
DEIF takes no responsibility for installation or operation of the generator set. If there is any doubt about how to install or operate the
engine/generator controlled by the Multi-line 2 unit, the company responsible for the installation or the operation of the set must be
contacted.
NOTE
The Multi-line 2 unit is not to be opened by unauthorised personnel. If opened anyway, the warranty will be lost.
Disclaimer
DEIF A/S reserves the right to change any of the contents of this document without prior notice.
The English version of this document always contains the most recent and up-to-date information about the product. DEIF does not
take responsibility for the accuracy of translations, and translations might not be updated at the same time as the English document.
If there is a discrepancy, the English version prevails.
1.3
Safety issues
Installing and operating the Multi-line 2 unit may imply work with dangerous currents and voltages. Therefore, the installation should
only be carried out by authorised personnel who understand the risks involved in working with live electrical equipment.
DANGER!
Be aware of the hazardous live currents and voltages. Do not touch any AC measurement inputs as this could lead to injury
or death.
1.4
Electrostatic discharge awareness
Sufficient care must be taken to protect the terminals against static discharges during the installation. Once the unit is installed and
connected, these precautions are no longer necessary.
1.5
Factory settings
The Multi-line 2 unit is delivered from the factory with default settings. These are not necessarily correct for the engine/generator set.
Check all the settings before running the engine/generator set.
1.6
General purpose
The commissioning guidelines provide information for a thorough, safe and effective commissioning of controller(s), within the
system.
COMMISSIONING GUIDELINES 4189341077D EN
Page 4 of 58
Advertisement
Table of Contents
