General Product Information; Agc 200 Product Information; Introduction; Type Of Product - Deif AGC 200 Installation Instructions Manual

AGC 200 installation instructions
4189340610 UK

2. General product information

2.1 AGC 200 product information

2.1.1 Introduction

The AGC 200 is a part of the DEIF Multi-line 2 product family. AGC 200 is a complete range of multi-function
generator protection and control products, integrating all the functions you need into one compact and attrac-
tive solution.
The concept of the AGC 200 is to offer a cost-effective solution to genset builders, who need a flexible gener-
ator protection and control unit for small to large genset applications. Being part of the Multi-line product fami-
ly, the standard functions can be supplemented with a variety of optional functions.

2.1.2 Type of product

The AGC 200 is a micro-processor based control unit containing all necessary functions for protection and
control of a genset.
It contains all necessary 3-phase measuring circuits, and all values and alarms are presented on the LCD
display.

2.1.3 Options

The AGC 200 product range consists of different basic versions, which can be supplemented with the flexible
options needed to provide the optimum solution. For example, the options cover various protections for gen-
erator, busbar and mains, serial communication, additional operator panels, and so on.

2.1.4 Variants

The following variants of the AGC 200 are available:
With engine communication (CAN bus) as standard:
AGC 212: Single generator, island operation
AGC 213: Single generator, mains failure (mains and generator breaker control)
With engine communication (CAN bus) and one extra CAN bus connection as standard:
AGC 222: Generator controller with power management
With engine communication (CAN bus) and two extra CAN bus connections as standard:
AGC 232: Generator controller with digital load sharing for island operation
AGC 233: Single generator, mains failure (mains and generator breaker control)
AGC 242: Generator controller with digital load sharing and power management
AGC 243: Generator controller with digital load sharing, power management and mains failure
AGC 244: Bus tie breaker controller with power management
AGC 245: Mains breaker controller with power management
AGC 246: Mains and tie breaker controller with power management
DEIF A/S
General product information
Page 6 of 67