Poe Leds; Figure 6: Poe Leds For The 1/2.5/5/10Gbps Ports On The At-X550-18Xspqm, Switch; Table 8: Link And Activity Leds For The 1/2.5/5/10Gbps Ports On The At-X550-18Xspqm Switch - Allied Telesis x550 Series Installation Manual

Chapter 1: Overview

PoE LEDs

28
Table 8. Link and Activity LEDs for the 1/2.5/5/10Gbps Ports on the
State
Solid Green
Flashing Green
Solid Amber
Flashing Amber
Off
This section explains the PoE LEDs for the 1/2.5/5/10Gbps twisted pair
ports on the AT-x550-18XSPQm Switch. Each port has one LED. Refer to
Figure 6.
Figure 6. PoE LEDs for the 1/2.5/5/10Gbps Ports on the AT-x550-
The states of the PoE LEDs are described in Table 9 on page 29.
AT-x550-18XSPQm Switch
The port has established a 2.5Gbps,
5Gbps, or 10Gbps link to a network
device.
The port is transmitting or receiving data
at 2.5Gbps, 5Gbps or 10Gbps.
The port has established a 1Gbps link to a
network device.
The port is transmitting or receiving data
at 1Gbps.
Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
18XSPQm, Switch
Description