How To Read The Instruction Manual; Copyright, Limitation Of Liability And Revision Rights - Danfoss VLT AQUA Drive FC 200 Instruction Manual

VLT AQUA High Power Instruction Manual

1. How to Read the Instruction Manual

1.1.1. Copyright, Limitation of Liability and Revision Rights

This publication contains information proprietary to Danfoss A/S. By accepting and using this
manual, the user agrees that the information contained herein will be used solely for operating
equipment from Danfoss A/S or equipment from other vendors, provided that such equipment is
intended for communication with Danfoss equipment over a serial communication link. This pub-
lication is protected under the copyright laws of Denmark and most other countries.
Danfoss A/S does not guarantee that a software program produced according to the guidelines
provided in this manual will function properly in every physical, hardware or software environment.
Although Danfoss A/S has tested and reviewed the documentation within this manual,
Danfoss A/S makes no warranty or representation, neither expressed nor implied, with respect to
this documentation, including its quality, performance or fitness for a particular purpose.
In no event shall Danfoss A/S be liable for direct, indirect, special, incidental or consequential
damages arising from the use or the inability to use information contained in this manual, even if
advised of the possibility of such damages. In particular, Danfoss A/S is not responsible for any
costs, including, but not limited to, those incurred as a result of lost profits or revenue, loss of or
damages to equipment, loss of computer programs, loss of data, the costs to substitute these, or
any claims by third parties.
Danfoss A/S reserves the right to revise this publication at any time and to make changes to its
contents without prior notice or any obligation to notify former or present users of such revisions
or changes.
This Instruction Manual will introduce all aspects of your VLT AQUA Drive.
Available literature for VLT AQUA Drive:
-
-
-
X = Revision number
YY = Language code
Danfoss Drives technical literature is also available online at www.danfoss.com/BusinessAreas/
DrivesSolutions/Documentations/Technical+Documentation.
The Instruction Manual MG.20.MX.YY provides the necessary information for getting the
drive up and running.
The Design Guide MG.20.NX.YY contains technical information about the drive design
and customer applications.
The Programming Guide MG.20.OX.YY provides information on how to program and in-
cludes complete parameter descriptions.
®
MG.20.P1.22 - VLT is a registered Danfoss trademark.
1. How to Read the Instruction Manual
1
5