It Line - Danfoss VLT AQUA Drive FC 200 Instruction Manual

VLT AQUA High Power Instruction Manual

2.1.9. IT Line

Par. 14-50
If this is done, it will reduce the RFI performance to A2 level.
2.1.10. Software Version and Approvals: VLT AQUA Drive
This instruction manual can be used for all VLT AQUA Drive adjustable frequency drives with
software version 1.00.
The software version number can be seen in parameter 15-43.
2.1.11. Disposal Instructions
IT Line
Do not connect 400 V adjustable frequency drives with RFI filters to line supplies
with a voltage between phase and ground of more than 440 V.
For IT lines and delta ground (grounded leg), line voltage may exceed 440 V be-
tween phase and ground.
RFI 1
can be used to disconnect the internal RFI capacitors from the RFI filter to ground.
Instruction Manual
Software version: 1.00
Equipment containing electrical components may not be disposed of
together with domestic waste.
It must be separately collected with electrical and electronic waste
according to local and currently valid legislation.
®
MG.20.P1.22 - VLT is a registered Danfoss trademark.
VLT AQUA Drive
2. Safety
2
13