Danfoss VLT AQUA Drive FC 200 Instruction Manual page 83

VLT AQUA High Power Instruction Manual
[1614]
0-23 Display Line 2 Large
Option:
[1615]
0-24 Display Line 3 Large
Option:
[1652]
0-37 Display Text 1
Option:
0-38 Display Text 2
Option:
*
Motor Current The options are the same as those listed for par. 0-20
Line 1.1 Small
Function:
Select a variable for display in line 2. The options are the same
as those listed for par. 0-20
* Frequency
Function:
* Feedback [Unit] Select a variable for display in line 2. The options are the same
as those listed for par. 0-20
Function:
In this parameter, it is possible to write an individual text string
for display in the LCP or to be read via serial communication. If
to be displayed permanently select Display Text 1 in par. 0-20,
0-21, 0-22, 0-23 or 0-24,
tons on the LCP to change a character. Use the ◀ and ▶ buttons
to move the cursor. When a character is highlighted by the cur-
sor, it can be changed. Use the ▲ or ▼ buttons on the LCP to
change a character. A character can be inserted by placing the
cursor between two characters and pressing ▲ or ▼.
Function:
In this parameter, it is possible to write an individual text string
for display in the LCP or to be read via serial communication. If
to be displayed permanently, select Display Text 2 in par. 0-20,
0-21, 0-22, 0-23 or 0-24,
tons on the LCP to change a character. Use the ◀ and ▶ buttons
to move the cursor. When a character is highlighted by the cur-
sor, this character can be changed. A character can be inserted
by placing the cursor between two characters and pressing ▲ or
▼.
®
MG.20.P1.22 - VLT is a registered Danfoss trademark.
4. How to program the adjustable frequency
.
Display Line 1.1 Small
Display Line 1.1 Small
Display Line XXX . Use the ▲ or ▼ but-
Display Line XXX . Use the ▲ or ▼ but-
drive
Display
.
4
.
83