Danfoss VLT AQUA Drive FC 200 Instruction Manual page 73

VLT AQUA High Power Instruction Manual
Select
•
•
Select
graphs.
Only display parameters selected in par. 0-20 and par. 0-24 can be viewed. It is possible to store
up to 120 samples in the memory for later reference.
0-01 Language
Option:
*
[0]
1-20 Motor Power [kW]
Range:
Size re-
lated
1-22 Motor Voltage
Range:
Size re-
lated
1-23 Motor Frequency
Range:
Size re-
lated
This parameter cannot be adjusted while the motor is running.
Changes made to get information about:
The last 10 changes. Use the up/down navigation keys to scroll between the last 10
changed parameters.
The changes made since default setting.
Loggings to get information about the display line readouts. The information is shown in
Function:
Defines the language to be used in the display.
English UK
Function:
[0.12-670 hp [0.09 - Enter the nominal motor power (in kW) according to the motor
*
500 kW]] nameplate data. The default value corresponds to the nominal
rated output of the unit.
This parameter cannot be adjusted while the motor is running.
Depending on the choices made in par. 0-03
tings
Function:
[10 - 1,000 V] Enter the nominal motor voltage according to the motor name-
* plate data. The default value corresponds to the nominal rated
output of the unit.
This parameter cannot be adjusted while the motor is running.
Function:
[20 - 1000 Hz] Select the motor frequency value from the motor nameplate
* data. For 87 Hz operation with 230/400 V motors, set the name-
plate data for 230 V/50 Hz. Adapt par. 4-13
Limit [RPM)
application.
®
MG.20.P1.22 - VLT is a registered Danfoss trademark.
4. How to program the adjustable frequency
, either par. 1-20 or par. 1-21
Maximum Reference
and par. 3-03
Regional Set-
Motor Power
is made invisible.
Motor Speed High
to the 87 Hz
drive
4
73