How To Read The Instruction Manual - Danfoss VLT FC 300 Instruction Manual

VLT ® Automation Drive FC 300
Instruction Manual High Power

1. How to Read the Instruction Manual

1.1. How to Read the Instruction Manual
1.1.1. How to Read this Instruction Manual
The adjustable frequency drive is designed to provide high shaft performance on electrical motors.
Please read this manual carefully for proper use. Incorrect handling of the adjustable frequency
drive may cause improper operation of the adjustable frequency drive or related equipment,
shorten lifetime or cause other problems.
This Instruction Manual will help you get started as well as install, program, and troubleshoot your
adjustable frequency drive.
Chapter 1, How to Read this Instruction Manual, introduces the manual and informs you
about the approvals, symbols, and abbreviations used in this literature.
Chapter 2, Safety Instructions and General Warnings, contains instructions on how to handle
the adjustable frequency drive correctly.
Chapter 3, How to Install, guides you through mechanical and technical installation.
Chapter 4, How to Program, shows you how to operate and program the adjustable frequency
drive via the Local Control Panel.
Chapter 5, General Specifications, contains technical data about the adjustable frequency
drive.
Chapter 6, Warnings and Alarms, assists you in solving problems that may occur when using
the adjustable frequency drive.
Available Literature for the FC 300
-
-
-
-
-
-
®
The VLT Automation Drive FC 300 Instruction Manual provides the neccessary infor-
mation for getting the drive up and running.
®
The VLT Automation Drive FC 300 Design Guide contains all technical information about
the drive design and applications including encoder, resolver and relay options.
®
The VLT Automation Drive FC 300 Profibus Instruction Manual provide the information
required for controlling, monitoring and programming the drive via a Profibus serial com-
munication bus.
®
The VLT Automation Drive FC 300 DeviceNet Instruction Manual provides the infor-
mation required for controlling, monitoring and programming the drive via a DeviceNet
serial communication bus.
®
The VLT Automation Drive FC 300 MCT 10 Instruction Manual provides information for
installing and using the software on a PC.
®
The VLT Automation Drive FC 300 24 V DC Backup instructions provide information for
installing the 24 V DC backup option.
MG.33.U1.22 - VLT ® is a registered Danfoss trademark.
1. How to Read the Instruction Manual
1
3