Danfoss VLT AQUA Drive FC 200 Instruction Manual page 31

VLT AQUA High Power Instruction Manual
The E1 enclosure is always delivered with a
pedestal as standard. Install the pedestal on
the floor. Fixing holes are to be drilled accord-
ing to this figure:
Mount the drive on the pedestal and using the
enclosed bolts, attach it to the pedestal, as
shown in the illustration.
®
MG.20.P1.22 - VLT is a registered Danfoss trademark.
3.23: Drill master for fixing holes in floor.
3.24: Mounting the drive to the pedestal
3. How to Install
3
31