How To Read The Instruction Manual; Copyright, Limitation Of Liability And Revision Rights; Approvals - Danfoss VLT AQUA Drive FC 200 Instruction Manual

How to Read the Instruction...

1 How to Read the Instruction Manual

1.1.1 Copyright, Limitation of Liability and
Revision Rights
This publication contains information proprietary to
Danfoss. By accepting and using this manual, the user
agrees that the information contained herein will be used
solely for operating equipment from Danfoss or equipment
from other vendors provided that such equipment is
intended for communication with Danfoss equipment over
a serial communication link. This publication is protected
under the copyright laws of Denmark and most other
countries.
Danfoss does not warrant that a software program
produced according to the guidelines provided in this
manual will function properly in every physical, hardware
or software environment.
Although Danfoss has tested and reviewed the documen-
tation within this manual, Danfoss makes no warranty or
representation, neither expressed nor implied, with respect
to this documentation, including its quality, performance,
or fitness for a particular purpose.
In no event shall Danfoss be liable for direct, indirect,
special, incidental, or consequential damages arising out of
the use, or the inability to use information contained in
this manual, even if advised of the possibility of such
damages. In particular, Danfoss is not responsible for any
costs, including but not limited to those incurred as a
result of lost profits or revenue, loss or damage of
equipment, loss of computer programs, loss of data, the
costs to substitute these, or any claims by third parties.
Danfoss reserves the right to revise this publication at any
time and to make changes to its contents without prior
notice or any obligation to notify former or present users
of such revisions or changes.
It has been assumed that all devices will be sitting behind
a firewall that does packet filtering and the environment
has well-implemented restrictions on the software that can
run inside the firewall. All nodes are assumed to be
"trusted" nodes.
1.1.2 Symbols
Symbols used in this manual
VLT AQUA 12-Pulse High Power Instruction Manual
NOTE!
Indicates something to be noted by the reader.
Indicates a general warning.
Indicates a high-voltage warning.

1.1.3 Approvals

1.1.4 Available literature for VLT
®
MG.20.Y1.22 - VLT is a registered Danfoss trademark
CAUTION
WARNING
✮
Indicates default setting
Drive FC 200
- ®
VLT AQUA Drive Instruction Manual MG.20.Mx.yy
provides the neccessary information for getting
the drive up and running.
- ®
VLT AQUA Drive High Power Instruction Manual
MG.20.Px.yy provides the neccessary information
for getting the HP drive up and running.
-
VLT ® AQUA Drive Design Guide MG.20.Nx.yy
contains all the technical information about the
drive and customer design and applications.
- ®
VLT AQUA Drive Programming Guide MN.
20.Ox.yy provides information on how to program
and includes complete parameter descriptions.
- ®
VLT AQUA Drive FC 200 Profibus MG.33.Cx.yy
-
VLT ® AQUA Drive FC 200 DeviceNet MG.33.Dx.yy
- Output Filters Design Guide MG.90.Nx.yy
- ®
VLT AQUA Drive FC 200 Cascade Controller MI.
38.Cx.yy
- Application Note MN20A102: Submersible Pump
Application
1
®
AQUA
1-1
1