Danfoss VLT AQUA Drive FC 200 Instruction Manual page 97

VLT AQUA High Power Instruction Manual
After selecting a parameter group, choose a
parameter using the navigation keys.
The middle section on the GLCP display shows
the parameter number and name, as well as
the selected parameter value.
4.1.6. Changing Data
1.
2.
3.
4.
5.
6.
4.1.7. Changing a Text Value
If the selected parameter is a text value,
change the text value using the up/down nav-
igation keys.
The up key increases the value, and the down
key decreases the value. Place the cursor on
the value to be saved and press [OK].
4.1.8. Changing a Group of Numeric Data Values
If the chosen parameter represents a numeric
data value, change the chosen data value us-
ing the <> navigation keys as well as the up/
down navigation keys. Use the <> navigation
keys to move the cursor horizontally.
Press the [Quick Menu] or [Main Menu] key.
Use the [ ] and [ ] keys to find the parameter group to edit.
▲ ▲
Use the [ ] and [ ] keys to find the parameter to edit.
▲ ▲
Press the [OK] key.
Use the [ ] and [ ] keys to select the correct parameter setting. Or, to move to digits
▲ ▲
within a number, use the keys. The cursor indicates the selected digit to be changed.
The [ ] key increases the value, the [ ] key decreases the value.
▲
Press the [Cancel] key to disregard the change, or press the [OK] key to accept the
change and enter the new setting.
®
MG.20.P1.22 - VLT is a registered Danfoss trademark.
4. How to program the adjustable frequency
4.10: Display example.
▲
4.11: Display example.
4.12: Display example.
drive
4
97