Danfoss VLT AQUA Drive FC 200 Instruction Manual page 59

VLT AQUA High Power Instruction Manual
Size/Type
P355
P400
P500
P560
3.9: E enclosures, 525-690 V
*170M fuses from Bussmann shown use the -/80 visual indicator; -TN/80 Type T, -/110 or TN/
110 Type T indicator fuses of the same size and amperage may be substituted for external use.
Danfoss PN
20220
20221
3.10: Additional Fuses for Non-UL Applications E enclosures, 525-690 V
Suitable for use on a circuit capable of delivering not more than 100,000 rms symmetrical amperes,
480/600/690 Volts maximum when protected by the above fuses.
Circuit Breaker Tables
Circuit Breakers manufactured by General Electric, Cat. No. SKHA36AT0800, 600 V AC maximum,
with the rating plugs listed below can be used to meet UL requirements.
Size/Type
P110
P132
P160
P200
P250
3.11: D enclosures, 380-480 V
Non-UL compliance
If UL/cUL is not to be complied with, we recommend using the following fuses, which will ensure
compliance with EN50178:
In case of malfunction, not following the recommendation may result in unnecessary damage to
the adjustable frequency drive.
P110 - P200
P250 - P450
3.6.15. Brake Resistor Temperature Switch
Torque: 0.5-0.6 Nm (5 in-lbs)
Screw size: M3
This input can be used to monitor the temperature of an externally connected brake resistor. If
the input between 104 and 106 opens, the adjustable frequency drive will trip on warning/alarm
Bussmann PN* Danfoss PN
170M4017 20220
170M5013
170M4017 20220
170M5013
170M6013 20221
170M6013 20221
Bussmann
170M4017
170M6013
Rating plug catalog #
SRPK800A300
SRPK800A350
SRPK800A400
SRPK800A500
SRPK800A600
380-480 V
380-480 V
®
MG.20.P1.22 - VLT is a registered Danfoss trademark.
Rating Losses (W)
700 A, 700 V
700 A, 700 V
900 A, 700 V
900 A, 700 V
Ferraz
6.9URD31D08A0700 20 610 32.700
6.9URD33D08A0900 20 630 32.900
type gG
type gR
3. How to Install
85
85
120
120
Siba
Amps
300
350
400
500
600
59
3