Danfoss VLT AQUA Drive FC 200 Instruction Manual page 86

4. How to program the adjustable frequency
drive
3-10 Preset Reference
Array [8]
0.00%
4
5-13 Terminal 29 Digital Input
Option:
[0]
5-14 Terminal 32 Digital Input
Option:
[0]
5-15 Terminal 33 Digital Input
Option:
[0]
5-40 Function Relay
86
* [-100.00 - 100.00 %] Enter up to eight different preset references (0-7) in this pa-
*
No Operation
*
No Operation
* No Operation
MG.20.P1.22 - VLT
VLT AQUA High Power Instruction Manual
rameter using array programming. The preset reference is sta-
ted as a percentage of the value Ref
Reference ) or as a percentage of the other external references.
If a Ref different from 0 (Par. 3-02
MIN
programmed, the preset reference is calculated as a percentage
of the full reference range, i.e., on the basis of the difference
between Ref and Ref . Afterwards, the value is added to
MAX MIN
Ref . When using preset references, select Preset ref. bit 0 /
MIN
1 / 2 [16], [17] or [18] for the corresponding digital inputs in
parameter group 5.1* Digital Inputs.
Function:
Same options and functions as par. 5-1*
Function:
Same options and functions as par. 5-1*
Pulse input
for .
Function:
Same options and functions as par. 5-1*
®
is a registered Danfoss trademark.
Maximum
(par. 3-03
MAX
Minimum Reference
) is
Digital Inputs
.
Digital Inputs
, except
Digital Inputs
.