Connecting The Cato Ceiling Version - Dräger Cato Instructions For Use Manual

Descriptions

Connecting the Cato ceiling version

Connecting the Cato ceiling version
1 Swing supporting flap upwards!
2 Press key until DVE reaches lower limit stop.
3 Press key to release the brake of the ceiling and/or
intermediate bearing.
The DVE can then be swivelled.
4 Key for releasing the brake of the head bearing.
The mount for the Cato can now be swivelled.
5 Swing supporting flap down again.
The DVE can no longer be operated via its own
keypad.
Plug the mains connector of the Cato into the socket
on the DVE.
Plug the gas withdrawal connectors into the
corresponding withdrawal sockets.
6 Move Cato right up to the mount on the DVE.
138
1
3
4
5
PPPPPP @@@@@@ PPPPPP @@@@@@ PPPPPP @@@@@@ PPPPPP PPPPPP PPPPPP @@@@@@ @@@@@@ PPPPPP @@@@@@ PPPPPP @@@@@@ @@@@@@ PPPPPP PPPPPP @@@@@@ PPPPPP @@@@@@ @@@@@@
6
@@@@@@ PPPPPP @@@@@@ PPPPPP @@@@@@ PPPPPP PPPPPP PPPPPP @@@@@@ PPPPPP @@@@@@ PPPPPP @@@@@@ PPPPPP @@@@@@ @@@@@@ PPPPPP @@@@@@ PPPPPP PPPPPP @@@@@@ @@@@@@
2