Heart/Lung Mode (Hlm) - Dräger Cato Instructions For Use Manual

Monitor functions
Alarm concept

Heart/lung mode (HLM)

Heart/lung mode (HLM)
A special alarm mode can be activated during operation
for the function »warning« in the »Configuration« menu
for operation with a heart/lung machine (»HLM« mode).
All apnoea alarms are deactivated in this mode and the
gas values are displayed continuously without connection
to the respiratory phase.
SpO alarms are deactivated in HLM mode. They are
2
automatically reactivated when pulsations are detected
again after ending HLM mode.
In this alarm mode, the parameters are monitored with
the same limits as are set in the ventilation mode from
which »HLM« was selected.
Heart/lung mode can be deactivated either
– via the »Configuration« menu or
– via the softkey »HLM off«.
68
HLM
Man./spont. alarm limits
CO
2
40
20
0
PAW
20
0
-- --
SpO
2 alarm
limits
11
etCO HLM
2
off
6.0 0
MV freq
alarm
info
Fi Fet
list
98 98
O 18
2
curve
0.8 0.8
Hal.
0 0
config.
N O
2