General; Power Supply; Ambient Conditions - Dräger Cato Instructions For Use Manual

Technical data

General

Power supply

Ambient conditions

Where tolerances are given in percent and as absolute values,
the higher value applies in each case!
General
Identification .............................: The Serial No. and Article No. are located on the rating plate (nameplate) on the
Weight .....................................: Cato basic machine approx. 140 kg
Dimensions...............................: See dimensional drawings on page 114
Power supply
Rated operating voltages ..........: depending on
Power input .............................: Max. 280 W (without auxiliary power sockets and without accessories)
Fuses .......................................: The fuses in the power adapter and master switch on contactor are only accessible
Auxiliary mains sockets .............: Do not connect any HF surgery devices to the auxiliary mains sockets!
Ambient conditions
Temperature .............................: + 15 to + 35 °C
Humidity ...................................: 20 to 80 %, no condensation (operation)
Air pressure..............................: 80 to 106 kPa
116
back of the machine. The Article No. also specifies the equipment level of the
machine.
Cato with two Vapors and monitor approx. 180 kg
100 V
AC
power adapter 120 V
AC
127 V
AC
230 V
AC
240 V
AC
Conversion only by specially trained personnel.
to qualified personnel with special tools.
Auxiliary power sockets (3x): 2 fuses installed per socket (2A DIN 41 622,
230/240 V )
AC
The connection of devices to the auxiliary mains socket may result in increased
risk of electric shock in the event of earthing failure!
Auxiliary mains sockets
– 20 to + 50 °C
0 to 98 %, no condensation (storage / transport)
50 to 110 kPa
+10 %, –15 %, 50/60 Hz
±10 %, 50/60 Hz
±10 %, 50/60 Hz
±10 %, 50/60 Hz
±10 %, 50/60 Hz
(operation)
(storage / transport)
(operation)
(storage / transport)