Axes X, Y, Z, Zo - HEIDENHAIN ND 7000 Operating Instructions Manual

16

Axes X, Y, Z, Zo

16.6.8
Path:
Parameters
Axis name
Axis type
Encoder
Error compensation
Positioning window
248
Settings ► Axes ► X, Y, Z, Zo
Explanation
In Milling application mode:
Definition of the axis name is displayed in the position preview
Settings:
Not defined
X
Y
Z
Default setting: X, Y, Z
In Turning application mode:
Definition of the axis name is displayed in the position preview
Settings:
Not defined
X
Z
Zo
Definition of the axis type
Settings:
Not defined
Linear axis
Spindle
Gear spindle
Default setting: Linear axis
Configuration of the connected encoder
Further information: "Encoder", Page 250
Configuration of the linear error compensation LEC or segment-
ed linear error compensation SLEC
Further information: "Linear error compensation (LEC)",
Page 253
Further information: "Segmented linear error compensation
(SLEC)", Page 253
Input of the scaling factor for the positioning aid in MDI mode
Setting range: 0.020 mm ... 2.000 mm
Default value: 0.100
HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018
Settings | Axes