Overview - HEIDENHAIN ND 7000 Operating Instructions Manual

8
8.1

Overview

This chapter contains all the information necessary for setting up the product.
During setup, the (Setup) engineer configures the unit for use on machine tools in
the respective application. This includes, for example, setting up operators as well
as creating preset tables and tool tables.
120
Make sure that you have read and understood the "Basic Operation"
chapter before carrying out the actions described below.
Further information: "Basic Operation", Page 57
The following steps must be performed only by qualified personnel.
Further information: "Personnel qualification", Page 27
HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018
Setup | Overview