Drilling Out The Through Hole - HEIDENHAIN ND 7000 Operating Instructions Manual

9
9.5.2

Drilling out the through hole

158
Milling – Quick Start | Machining a through hole (manual operation mode)
On the machine tool, insert the Ø 19.8 mm drill into the
spindle
Tap Tools on the status bar
The Tools dialog appears
Tap Drill 19.8
Tap Confirm
The associated tool parameters are applied automatically
The Tools dialog is closed
On the product, set a spindle speed of 400 rpm
On the OEM bar: Tap Coolant ON
Drill out the through hole and retract the spindle
On the OEM bar: Tap Coolant OFF
You have successfully drilled out the through hole
HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018