Axes (Switching Functions) - HEIDENHAIN ND 7000 Operating Instructions Manual

Settings | Interfaces
16.4.4

Axes (switching functions)

Settings ► Interfaces ► Switching functions ► Axes
Path:
Parameter
General settings
X
Y
Z
Zo
HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018
Explanation
Assignment of the digital input according to pin layout to zero
reset all axes
Default setting: Not connected
Assignment of the digital input according to pin layout to reset
the axis to zero
Default setting: Not connected
The availability of the axes depends on the
configuration of the unit.
16
239