Milling – Quick Start | Machining a rectangular pocket (MDI mode of operation)
9.6.2
Milling the rectangular pocket
The values for spindle speed, milling depth and feed rate depend on the
end mill's metal-removal rate and the machine tool.
HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018
On the machine tool, insert the Ø 12 mm end mill into the
spindle
On the product, set the spindle speed to a suitable value
On the OEM bar: Tap Coolant ON
Follow the instructions of the wizard
Set the milling cutter to the desired milling depth
Start the machining – follow the instructions of the wizard
The product executes the individual steps of the milling
procedure
On the OEM bar: Tap Coolant OFF
Retract the spindle
Tap Close
Program run is terminated
The wizard closes
You have successfully machined the rectangular pocket
9
161