Display - HEIDENHAIN ND 7000 Operating Instructions Manual

Settings | General

Display

16.2.3
Settings ► General ► Display
Path:
Parameter
Position display
Position values
Distance-to-go indicator
Digits before the decimal point
for size-adjusted axis display
HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018
Explanation
Configuration of the position display in MDI mode. The configu-
ration also determines the actions specified by the wizards MDI
mode:
Position with distance to go – the wizard requests traversing
the axis to the displayed position.
Distance to go with position – the wizard requests traversing
the axis to 0 and a positioning aid is shown.
Settings:
Position: The position is displayed large
Position with distance to go: The position is displayed large
and the distance to go is displayed small
Distance to go with position: The distance to go is displayed
large and the position is displayed small
Default setting: Distance to go with position
The position values can describe the actual values or nominal
values of the axes.
Settings:
Actual value
Nominal value
Default setting: Actual value
Display of the distance-to-go indicator in MDI mode
Settings: ON or OFF
Default value: ON
The number of integer places indicates the size at which the
position values are displayed. If the number of integer values is
exceeded, then the display is reduced in size so that the integers
can be shown.
Setting range: 0 ... 6
Default value: 3
16
229