Overview; Mdi Menu - HEIDENHAIN ND 7000 Operating Instructions Manual

14
14.1

Overview

This chapter describes the "MDI (Manual Data Input)" mode of operation and how
to execute machining steps in single blocks in this mode.
Short description
The MDI mode enables you to execute precisely one single machining block. The
values to be entered into the input fields can be taken directly from a properly
dimensioned production drawing.
Figure 58: MDI menu
1 View bar
2 Block parameters
3 MDI block
4 Status bar
5 Block tools
210
Make sure that you have read and understood the "Basic Operation"
chapter before carrying out the actions described below.
Further information: "Basic Operation", Page 57
Before you can use the product in the MDI mode, the presets must be
set in the Manual Operation mode.
Further information: "Defining presets", Page 184
Tap MDI in the main menu
Tap Create on the status bar
The user interface for the MDI mode is displayed
1 2 3
5
HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018
Turning – MDI mode | Overview
4