Obligations Of The Operating Company - HEIDENHAIN ND 7000 Operating Instructions Manual

2
2.6

Obligations of the operating company

The operating company owns or leases the product and the peripherals. It is
responsible that the intended use is complied with at all times.
The operating company must:
Assign the different tasks to be performed on the product to appropriate,
qualified and authorized personnel
Verifiably train the personnel in the authorizations and tasks
Provide all materials and means necessary in order for the personnel to
complete the assigned tasks
Ensure that the product is operated only when in perfect technical condition
Ensure that the product is protected from unauthorized use
2.7 General safety precautions
The specific safety precautions required for the individual activities to be
performed on the product are indicated in the respective sections of these
instructions.
2.7.1 Symbols on the product
The following symbols are used to identify the product:
Symbol
28
The safety of any system incorporating the use of this product is the
responsibility of the assembler or installer of the system.
The product supports the use of a wide variety of peripheral devices
from different manufacturers. HEIDENHAIN cannot make any
statements on the specific safety precautions to be taken for
these devices. The safety precautions provided in the respective
documentations must be observed. If there is no documentation at
hand, it must be obtained from the manufacturers concerned.
Meaning
Observe the safety precautions regarding electricity and power
connection before you connect the product.
Functional ground connection as per IEC/EN 60204-1. Observe
the information on installation.
Product seal. Breaking or removing the product seal will result
in forfeiture of warranty and guarantee.
Safety | Obligations of the operating company
HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018