C Axis - HEIDENHAIN ND 7000 Operating Instructions Manual

Settings | Axes

C axis

16.6.9
The auxiliary axis C designates the rotary axis that rotates about the Z axis and is
used for angular measurement (e.g., for thread cutting). If the C axis is configured
in the unit, then the position of the C axis can be read in the position display.
Settings ► Axes ► C
Path:
Parameter
Axis name
Axis type
Encoder
Error compensation
Positioning window
HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018
Explanation
Definition of the axis name displayed in the position preview
Settings:
Not defined
C
Default setting: Not defined
Definition of the axis type
Settings:
Not defined
Linear axis
Default setting: Linear axis
Configuration of the connected encoder
Further information: "Encoder", Page 250
Configuration of the linear error compensation LEC or segment-
ed linear error compensation SLEC
Further information: "Linear error compensation (LEC)",
Page 253
Further information: "Segmented linear error compensation
(SLEC)", Page 253
Input of the scaling factor for the positioning aid in MDI mode
Setting range: 0.020 mm ... 2.000 mm
Default value: 0.100
16
249