9
9.10.2
Drilling the row of holes
168
Milling – Quick Start | Drilling a circular hole pattern (MDI operation)
On the machine tool, insert the Ø 5.0 mm drill into the
spindle
On the product, set a spindle speed of 3500 rpm
On the OEM bar: Tap Coolant ON
Follow the instructions of the wizard
Drill the row of holes and retract the spindle
On the OEM bar: Tap Coolant OFF
Tap Close
Program run is terminated
The wizard closes
You have successfully completed the row of holes
HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018