Linear Error Compensation (Lec); Segmented Linear Error Compensation (Slec) - HEIDENHAIN ND 7000 Operating Instructions Manual

Settings | Axes

16.6.13 Linear error compensation (LEC)

Settings ► Axes ► X or Y or Z or Zo or C ► Error compensation ►
Path:
Linear error compensation (LEC)
Parameter
Compensation
Nominal length
Actual length

16.6.14 Segmented linear error compensation (SLEC)

Settings ► Axes ► X or Y or Z or Zo or C ► Error compensation ►
Path:
Segmented linear error compensation (SLEC)
Parameters
Compensation
Table of supporting points
Create table of supporting points
HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018
Explanation
Mechanical influences on the axes of the machine are compen-
sated
Settings:
ON: Compensation is active
OFF: Compensation is not active
Default value: OFF
If Compensation is active, the Nominal length and
Actual length cannot be edited or generated.
Input field for Nominal length in mm
Input field for Actual length in mm
Explanation
Mechanical influences on the axes of the machine are
compensated
Settings:
ON: Compensation is active
OFF: Compensation is not active
Default value: OFF
When Compensation is active, then the Table of
supporting points cannot be edited or created.
Opens the table of supporting points for manual editing
The menu for creating a new Table of supporting points is
opened
Further information: "Create table of supporting points",
Page 254
16
253