Working With The Positioning Aid; Executing An Mdi Block With Scaling Factor; Distance To Go With Position View With Graphic Positioning Aid - HEIDENHAIN ND 7000 Operating Instructions Manual

Turning – MDI mode | Working with the positioning aid
14.6

Working with the positioning aid

During positioning to the next nominal position, the product assists you by
displaying a graphical positioning aid ("traversing to zero"). A scale is shown
underneath each axis you traverse to zero. The graphic positioning aid is a small
square that symbolizes the tool center.
Figure 62: Distance to go with position view with graphic positioning aid
1 Actual value
2 Distance-to-go
3 Positioning aid (tool center)
The positioning aid moves across the measuring scale when the tool center is
located within a range of ± 5 mm of the nominal position. The color also changes in
the following way:
Display of positioning aid
Red
Green

Executing an MDI block with Scaling factor

14.7
If a scaling factor is activated for one or more axes, then this scaling factor is
multiplied with the stored nominal position during execution of an MDI block. By
this means, you can mirror and scale an MDI block.
You can activate a scaling factor in the quick access menu.
Further information:
HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018
1
3
Meaning
The tool center is moving away from the
nominal positions
The tool center is moving toward the nominal
position
"Adjusting settings in the quick access menu", Page 83
2
14
215