Endress+Hauser Mycom S CPM 153 Operating Instructions Manual page 74

6 Start-up
⇒
PARAM
74
6.5.16 Manual operation
To enter the menu, proceed as follows:
CODE CHOICE
(Default = bold)
R1 ChemoClean
Hold
R2 !!!Caution!!
You are now leaving manual
operation.
ChemoClean:
RB1 Weekly progr.
Clean trigger
Ext. Control
RB2 Abort
Start
HOLD:
RC1 HOLD off
HOLD on
⇒
INFO
!
Select manual operation
Note!
• Leave the manual operation menu by pressing
"PARAM", "DIAG" or "MEAS".
• The settings are only active in this menu. Nothing is
saved when you leave.
If you leave the manual operation:
Note in display
Confirm with "Enter": Leave the manual operation.
Abortion with "PARAM": Remaining in manual operation
mode.
off
Note in display (no entry):
off System status
off
ChemoClean cleaning
Start / Abort.
!
Here, each external programme start is suppressed.
Note!
Leave this item by pressing "PARAM".
Manual operation
Activate / deactivate Hold
The "HOLD" function freezes the current outputs as
!
soon cleaning/calibration is undertaken.
Note!
If the controller function lies on current output 2,
it follows the instructions of the defined "controller hold"
(s. page 45).
Mycom S CPM 153
Endress+Hauser