Endress+Hauser Mycom S CPM 153 Operating Instructions Manual page 71

Mycom S CPM 153
⇒
PARAM
Endress+Hauser
To enter the menu, proceed as follows:
CODE CHOICE
(default = bold)
O1 Weekly progr.
Clean trigger
Ext. Control
O2 Weekly progr.
Clean trigger
Ext. Control
O3
Weekly programme
User prg.
Weekly programme:
OA1 Monday
Tuesday
.....
Sunday
OA2 Edit day?
Copy day?
Edit day:
OAA1 Clean
18:22 18:23
no progr.
OAA2 01 Water
02 +Cleaner
03 Water
04 Rep. cleaning
⇒
INFO
off Select control levels
off Select the function which will trigger ChemoClean
off cleaning.
off Note in display:
off Displays the current system status
off
Select the configuration menu
Weekly programme: Select only with "weekly pro-
gramme on"
User programme: Here you create customer-specific
programmes using the programme editor (see pro-
gramme editor, p. 72).
1 Weekday selection menu
2 Select cleaning day. The number of cleaning triggers
... for the day is shown behind each day.
0
Select day function
Edit day: You can edit the function for this day.
Copy day: The day which you have selected in field
OA1 is copied to the day selected in the following field.
View/edit day programme
You can see the complete day programme or "no
progr.". You can overwrite this point and the set pro-
grammes with a new selection.
The start and finish times are always given.
Example:
Clean
18:22 (start time) 18:23 (finish time)
User prog.: use of a programme you created (see
programme editor, p. 72)
0s
Select programme blocks
30s The times for individual programme steps can be
30s individually adjusted here. Select a block for editing by
0x pressing "E".
+Cleaner: Cleaner will be delievered additional to
water.
!
Rep. cleaning: Number of repeats of steps 01 to 03
Note!
• When you change one of this programme blocks the
changes will affect every cleaning.
• Leave this selection by pressing "PARAM".
6 Start-up
71