Endress+Hauser Mycom S CPM 153 Operating Instructions Manual page 34

6 Start-up
⇒
PARAM
!
34
6.5.3 Set up 1 – Access codes
To enter the menu, proceed as follows:
CODE CHOICE
(default = bold)
D1 0000
(0 ... 9997)
D2 0000
(0 ... 9997)
Note!
Danger of misuse. Make sure that the codes you enter and the universal code
(s. page 34) are protected against misuse by unauthorised persons. Note down the
codes and keep the in a place where unauthorised persons do not have access.
⇒
INFO
(E1, 2 = editor types, s. page 23)
Enter maintenance code
In the range 0000 ... 9997, the code can be freely selec-
ted.
0000 = no Security Locking.
Enter specialist code
In the range 0000 ... 9997, the code can be freely selec-
ted.
0000 = no Security Locking.
Mycom S CPM 153
⇒
Endress+Hauser