Creating Your First Trace On The Oma - Keysight N4391A Getting Started

2 Getting Started

Creating Your First Trace on the OMA

32
The following procedure will familiarize you with the OMA by loading a
recorded demo then using the Smart Setup dialog to ensure that the
parameters are set properly.
The recorded demo is a PRBS 15 dual polarization signal with a
performance that is typically achieved on optical coherent long-haul
transmitters. This signal has incorporated bit errors inserted into the
transmitter PRBS generation.
1 Power on the equipment.
2 Start the Keysight 89600 VSA Software interface by double-clicking on
the Keysight OMA icon (
3 In the Keysight 89600 VSA Software interface, select
File > Recall > Recall Demo.
4 In the Recall Demo dialog, open the \Optical Signals\Generic\
DP-QPSK_10.12 GHz_with_errors.htm file.
5 Select the Smart Setup menu.
Keysight N4391A/N4392A Optical Modulation Analyzer, Getting Started
).