Switching On Spider8 - HBM Spider8 Operating Manual

C-6

1.2 Switching on Spider8

Spider8
1. Connect the Spider8 to a PC (see page D-27).
2. Connect the Spider8 and the power pack provided to the mains
supply.
3. Switch on the Spider8 with the POWER button on the front panel
of the device.
Position of On/Off switch:
ON
The Spider8 carries out a function test (all 3 LEDs light up briefly)
and stores a record of the components that are present.
If the function test is positive, the power indicator lights up.
Commissioning Ý Switching on the PC
OFF