LXE MX7 Tecton CE Reference Manual page 270

How to: Use Sign On Screen
10. Verify the device is authenticated by reviewing the Status tab. When the device is property configured, the
indicates the device is Authenticated and the method used.
11. The sign-on screen is displayed after a reboot.
Note: See Configuring the Profile
If a user enters invalid credentials and clicks OK, the device associates but does not authenticate. The user is again prompted
to enter credentials.
If the user clicks the Cancel button, the device does not associate. The user is not prompted again for credentials until:
the device is rebooted,
l
the radio is disabled then enabled,
l
the Reconnect button on the
l
the profile is modified and the Commit button is clicked.
l
for more details.
Diags Tab is clicked or
E-EQ-MX7CERG-A [ 258 ] MX7 Tecton™ CE Reference Guide
Sign-On Screen
Status Tab