Peripherals; Heaters - LXE MX7 Tecton CE Reference Manual

Peripherals

Peripherals
Start | Settings | Control Panel | Peripherals
This panel is used to enable and disable the touch screen and scan window heaters.
Factory Default Settings

Heaters

Touch screen heater
Scan window heater
Heaters
Note: Settings have no effect if the touch screen / scan window heaters are not installed.
Click the radio button to enable or disable the heaters.
The default heater trip point is 40° C / 100° F. Choose a different trip point from the drop down list and click OK. The change is
in effect immediately.
Celsius degrees (temperature) = (fahrenheit temperature-32)*5/9.
E-EQ-MX7CERG-A [ 201 ] MX7 Tecton™ CE Reference Guide
Enabled
Enabled