32 Key Numeric-Alpha Keymap - LXE MX7 Tecton CE Reference Manual

32 key Numeric-Alpha Keymap

32 key Numeric-Alpha Keymap
The following keypad
l
emulators use a separate keymap.
When using a sequence of keys that require an alpha key, first press the Alph key. Use the Shft sticky key or the Caps
l
key sequence (Blue+Tab) for upper case alphabetic characters.
Pressing the Alph key forces "Alpha" mode for the 2,3,4,5,6,7,8, and 9 keys. The 1 and 0 keys continue to place a 1 and
l
0 into the text field.
To create a combination of numbers and letters before pressing Enter, remember to tap the Alph key to toggle between
l
Alpha and Numeric mode.
When using a sequence of keys that do not include the Alph key but does include a sticky key, press the sticky key first
l
then the rest of the key sequence.
Pressing the Power key when in any sticky mode (Blue, Orange, Shift, etc) either turns the device On (when Off) or
l
places it in Suspend (when On).
For those keymaps that require remapping (MAP), keys can be remapped using KeyPad (Start | Settings | Control Panel
l
| KeyPad).
To get this Key / Function
Power / Suspend
Field Exit (default is VK_PAUSE)
MAP = Mappable
=
(
!
)
Volume Adjust Mode
Display Backlight Brightness
Adjust Mode
Toggle Alpha Mode
Toggle Blue Mode
Toggle Orange Mode
Toggle Shift Mode
Alt Mode
Control Mode
Esc
Space
Enter
keymap is used on an MX7 Tecton that is NOT running an LXE Terminal Emulator. LXE terminal
E-EQ-MX7CERG-A [ 305 ] MX7 Tecton™ CE Reference Guide
Press these Keys in this Order
Power
Blue (MAP) Shft (MAP)
Orange Shft (MAP)
Blue Shft (MAP)
Orange Shft (MAP)
Blue Shft (MAP)
Orange Scan
Blue Scan
Alph
Blue
Orange
Shft
Alt
Ctrl
Blue Alt
Spc
Enter
Diamond #1
Diamond#2
Default is Mappable
Diamond#2
Default is Mappable
Diamond#3
Default is Mappable
Diamond#3
Default is Mappable
Up Arrow
Down Arrow
Up Arrow
Down Arrow