Wpa/Leap - LXE MX7 Tecton CE Reference Manual

WPA/LEAP

WPA/LEAP
To use WPA/LEAP, make sure the following profile options are used.
Enter the SSID of the Access Point assigned to this profile
l
Set EAP Type to LEAP
l
Set Encryption to WPA TKIP
l
Set Auth Type as follows:
l
If the Cisco/CCX certified AP is configured for open authentication, set the Auth Type radio parameter to
l
Open.
If the AP is configured for network EAP only, set the Auth Type radio parameter to LEAP.
l
See Sign-On vs. Stored Credentials
To use Stored Credentials, click on the Credentials button. No entries are necessary for Sign-On Credentials as the user will
be prompted for the Username and Password when connecting to the network.
Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
WPA/LEAP Profile Configuration
for information on entering credentials.
WPA/LEAP Credentials
E-EQ-MX7CERG-A [ 269 ] MX7 Tecton™ CE Reference Guide