Symbologies; Custom Aim Ids - LXE MX7 Tecton CE Reference Manual

Symbologies

Symbologies
There are three ID types. When an HHP imager scan engine is installed, only AIM, Custom and HHP ID Types are displayed.
HHP does not support Symbol IDs.
When a Symbol scan engine is installed, AIM, Custom and Symbol are displayed as the ID Types. Symbol does not support
HHP IDs.

Custom AIM IDs

Advanced properties are available when an integrated HHP imager is installed in the MX7 Tecton. Advanced properties are
applicable regardless of the ID type selected (AIM or HHP).
Not all HHP symbologies have Advanced options. Click the symbology link in the table below for symbology Advanced
options.
Note: When the integrated scan engine is a Symbol scan engine, AIM IDs apply, but Advanced properties do not.
Factory Default settings
Symbology
All
Codabar
Code11
Code 39
Code 93
Code 128
Discrete 2 of 5
EAN 128
Interleaved 2 of 5
MSI
Other
PDF417
Plessey
RSS14
UPC/EAN
DCWedge does not manage mutually exclusive option selections. The user is responsible for understanding the options that
can co-exist for the data collection device. The documentation provided from the manufacturer of the scanner/imager being
managed describes the interaction between symbologies and their configurations.
E-EQ-MX7CERG-A [ 135 ] MX7 Tecton™ CE Reference Guide
Enabled?
Yes
No
No
No
No
Yes
Yes
Yes
No
No
Yes
No
No
No
Yes
Min Max
1 all
1 all
1 all
1 all
1 all
1 all
1 all
1 all
1 all
4 48
1 all
1 all
4 48
1 all
1 all