Mx7T Options; Communication; Enable Tcp/Ip Version 6; Allow Remote Desktop Autologon - LXE MX7 Tecton CE Reference Manual

MX7T Options
MX7T Options
Start | Settings | Control Panel | MX7T Options
Set options such as IP V6, time sync, touchscreen enable and CapsLock. Also set Status Popup taskbar icon display options
for the Admin and User.
It may be necessary to warmboot the MX7 Tecton after making desired changes. A pop up window indicates if a warmboot is
required.
Note: Contact your LXE representative

Communication

Options on this tab configure communication options for the MX7 Tecton.

Enable TCP/IP Version 6

By default, IPv6 is disabled on the LXE device. Check this checkbox to enable IPv6.

Allow Remote Desktop Autologon

By default, Remote Desktop Autologon is disabled. Check this checkbox to enable Remote Desktop Autologon.
Note: The .RDP file must be saved in the \System folder. When prompted, use the Save As button to save the .RDP file
is the \System directry. If the .RDP file is saved in the default root folder location, the .RDP file will not persist across a
warmboot.
if there is no icon corresponding to this item in the Control Panel.
MX7T Options / Communications Tab
E-EQ-MX7CERG-A [ 192 ] MX7 Tecton™ CE Reference Guide